Choose language:

Anti vibration pads sets

Anti vibration pads sets

If the properties of the individual anti vibration pads are insufficient for optimal vibration isolation, isolation pads can be layered for additional adjustment. By layering 2 to 4 anti vibration pads to a set, the vertical natural frequency is reduced and effective vibration isolation is achieved. Click on article to show available standard pad sizes.

Click on article to show available standard pad sizes.

 NameArt. no.Pad thickness
[mm]
ProfileIdeal load
[daN/cm2]
Natural frequency
at ideal load
[Hz] vertical
 
Type illustrationAirLoc K8133.04813.7050without10.027.0
Article information
This 70° shore A material is characterised by very high damping and is therefore especially suitable for isolating setups of presses and similar machines. No profile, good non-skid properties.
TypeK813
NameAirLoc K813
Art. no.3.04813.70
Coloryellow green
Technical Data
Profilewithout
Hardness [° Shore A]70 - 75
Load p from [daN/cm2]5.0
Load p to [daN/cm2]20.0
Ideal load p [daN/cm2]10.0
Vertical natural frequency at ideal load f0v [Hz]27.0
Horizontal natural frequency at ideal load f0h [Hz]7.5
Tolerance natural frequency +/- [Hz]10%
Vertical damping ratio D at ideal load [%]23.5
Tolerance +/-10%
Coefficient of friction on concrete with fine mortar0.8
Coefficient of friction tolerance +/-0.1
Weight [kg]36.0
Dimensions
Length L [mm]1000
Width B [mm]500
Pad thickness unloaded [mm]50
Pad thickness toleranceDIN 7715/T5/P3
Range of application
Temperature range from [°C]-15
Temperature range to [°C]100
Diagram vertical natural frequency
Tolerance natural frequency vertical f0v [Hz] +/-10%
Diagram deflection
Tolerance Deflection s +/-10%
Standard pad dimensions
Article no.Length [mm]Width [mm]
3.04813.701000500
3.04813.71500500
3.04813.72500250
3.04813.76250250
3.04813.80200200
3.04813.85125125
3.04813.86100100
Other dimensions in all shapes available from stock upon request.

Type illustration

Type illustration
Type illustrationAirLoc K9051.04905.7036.5double6.036.0
Article information
Well suited as standard quality for foundation isolations. It is primarily used under large foundations of newspaper printing presses and other heavy machines with big dimensions.
TypeK905
NameAirLoc K905
Art. no.1.04905.70
Colorgreen
Technical Data
Profiledouble
Load p from [daN/cm2]3.0
Load p to [daN/cm2]8.0
Ideal load p [daN/cm2]6.0
Vertical natural frequency at ideal load f0v [Hz]36.0
Horizontal natural frequency at ideal load f0h [Hz]8.0
Tolerance natural frequency +/- [Hz]10%
Vertical damping ratio D at ideal load [%]8.5
Tolerance +/-10%
Coefficient of friction on concrete with fine mortar0.8
Coefficient of friction tolerance +/-0.1
Weight [kg]20.4
Dimensions
Length L [mm]1000
Width B [mm]500
Pad thickness unloaded [mm]36.5
Pad thickness toleranceDIN 7715/T5/P3
Range of application
Temperature range from [°C]0
Temperature range to [°C]70
Diagram vertical natural frequency
Tolerance natural frequency vertical f0v [Hz] +/-10%
Diagram deflection
Tolerance Deflection s +/-10%
Standard pad dimensions
Article no.Length [mm]Width [mm]
1.04905.701000500
1.04905.71500500
1.04905.72500250
1.04905.76250250
1.04905.80200200
1.04905.85125125
1.04905.86100100
Other dimensions in all shapes available from stock upon request.

Type illustration

Type illustration
Type illustrationAirLoc K9751.04975.7044double3.018.1
Article information
Well suited as soft foundation isolation material. It is primarily used under foundations of presses and large machine tools of all kinds.
TypeK975
NameAirLoc K975
Art. no.1.04975.70
Colorgreen
Technical Data
Profiledouble
Load p from [daN/cm2]2.0
Load p to [daN/cm2]4.0
Ideal load p [daN/cm2]3.0
Vertical natural frequency at ideal load f0v [Hz]18.1
Horizontal natural frequency at ideal load f0h [Hz]5.5
Tolerance natural frequency +/- [Hz]10%
Vertical damping ratio D at ideal load [%]7.0
Tolerance +/-10%
Coefficient of friction on concrete with fine mortar0.7
Coefficient of friction tolerance +/-0.1
Weight [kg]21.2
Dimensions
Length L [mm]1000
Width B [mm]500
Pad thickness unloaded [mm]44
Pad thickness toleranceDIN 7715/T5/P3
Range of application
Temperature range from [°C]0
Temperature range to [°C]70
Diagram vertical natural frequency
Tolerance natural frequency vertical f0v [Hz] +/-10%
Diagram deflection
Tolerance Deflection s +/-10%
Standard pad dimensions
Article no.Length [mm]Width [mm]
1.04975.701000500
1.04975.71500500
1.04975.72500250
1.04975.76250250
1.04975.80200200
1.04975.85125125
1.04975.86100100
Other dimensions in all shapes available from stock upon request.

Type illustration

Type illustration
Article illustrationBiLoc B22.04202.7126double3.014.3
Article information
Passive isolation for sensitive devices, e.g. laboratory instruments and weighing equipment.
TypeB2
NameBiLoc B2
Art. no.2.04202.71
Colorblack
Technical Data
Profiledouble
Hardness [° Shore A]40 - 45
Load p from [daN/cm2]1.0
Load p to [daN/cm2]5.0
Ideal load p [daN/cm2]3.0
Vertical natural frequency at ideal load f0v [Hz]14.3
Horizontal natural frequency at ideal load f0h [Hz]4.7
Tolerance natural frequency +/- [Hz]10%
Vertical damping ratio D at ideal load [%]6.7
Tolerance +/-10%
Coefficient of friction on concrete with fine mortar0.9
Coefficient of friction tolerance +/-0.1
Weight [kg]6.8
Dimensions
Length L [mm]500
Width B [mm]500
Pad thickness unloaded [mm]26
Pad thickness toleranceDIN 7715/T5/P3
Range of application
Temperature range from [°C]-20
Temperature range to [°C]80
Diagram vertical natural frequency
Tolerance natural frequency vertical f0v [Hz] +/-10%
Diagram deflection
Tolerance Deflection s +/-10%
Standard pad dimensions
Article no.Length [mm]Width [mm]
2.04202.71500500
2.04202.72500250
2.04202.76250250
2.04202.80200200
2.04202.85125125
2.04202.86100100
Other dimensions in all shapes available from stock upon request.

Article illustration

Article illustration
Type illustrationBiLoc B32.04203.7139double3.010.3
Article information
Foundation isolations, passive isolation for very sensitive devices and systems.
TypeB3
NameBiLoc B3
Art. no.2.04203.71
Colorblack
Technical Data
Profiledouble
Hardness [° Shore A]40 - 45
Load p from [daN/cm2]1.0
Load p to [daN/cm2]5.0
Ideal load p [daN/cm2]3.0
Vertical natural frequency at ideal load f0v [Hz]10.3
Horizontal natural frequency at ideal load f0h [Hz]3.7
Tolerance natural frequency +/- [Hz]10%
Vertical damping ratio D at ideal load [%]7.3
Tolerance +/-10%
Coefficient of friction on concrete with fine mortar0.9
Coefficient of friction tolerance +/-0.1
Weight [kg]10.2
Dimensions
Length L [mm]500
Width B [mm]500
Pad thickness unloaded [mm]39
Pad thickness toleranceDIN 7715/T5/P3
Range of application
Temperature range from [°C]-20
Temperature range to [°C]80
Diagram vertical natural frequency
Tolerance natural frequency vertical f0v [Hz] +/-10%
Diagram deflection
Tolerance Deflection s +/-10%
Standard pad dimensions
Article no.Length [mm]Width [mm]
2.04203.71500500
2.04203.72500250
2.04203.76250250
2.04203.80200200
2.04203.85125125
2.04203.86100100
Other dimensions in all shapes available from stock upon request.

Type illustration

Type illustration
Article illustrationBiLoc B42.04204.7152double3.08.7
Article information
Foundation isolations, passive isolation for very sensitive devices and systems.
TypeB4
NameBiLoc B4
Art. no.2.04204.71
Colorblack
Technical Data
Profiledouble
Hardness [° Shore A]40 - 45
Load p from [daN/cm2]1.0
Load p to [daN/cm2]5.0
Ideal load p [daN/cm2]3.0
Vertical natural frequency at ideal load f0v [Hz]8.7
Horizontal natural frequency at ideal load f0h [Hz]3.3
Tolerance natural frequency +/- [Hz]10%
Vertical damping ratio D at ideal load [%]5.5
Tolerance +/-10%
Coefficient of friction on concrete with fine mortar0.9
Coefficient of friction tolerance +/-0.1
Weight [kg]13.35
Dimensions
Length L [mm]500
Width B [mm]500
Pad thickness unloaded [mm]52
Pad thickness toleranceDIN 7715/T5/P3
Range of application
Temperature range from [°C]-20
Temperature range to [°C]80
Diagram vertical natural frequency
Tolerance natural frequency vertical f0v [Hz] +/-10%
Diagram deflection
Tolerance Deflection s +/-10%
Standard pad dimensions
Article no.Length [mm]Width [mm]
2.04204.71500500
2.04204.72500250
2.04204.76250250
2.04204.80200200
2.04204.85125125
2.04204.86100100
Other dimensions in all shapes available from stock upon request.

Article illustration

Article illustration

Our application engineers will be glad to recommend you the optimum solution. Please contact us!

© 2016 AirLoc Schrepfer Ltd.Telephone: +41 44 929 77 00 - Fax: +41 44 929 77 10
Industriestrasse 2, P.O. Box 123, CH-8618 Oetwil am See
www.airloc-schrepfer.com
info@airloc-schrepfer.com
Technical changes without prior notice
Print date: 10.12.2016