Choose language:

Ceiling supports - Reduce ceiling vibrations

When existing buildings are used for a new purpose, for example when installing new machines, ceilings may quickly reach their permissible load bearing capacity. Another risk is that critical vibrations are caused by the machines as a result of the low natural frequency of the ceilings.

Isolating the machine usually does not provide the desired results. What is required is a higher inherent stiffness of the ceiling achieved through structural changes. The easy-to-install AirLoc ceiling supports are perfectly suited for this. Combined with high-precision wedge mounts they are the ideal solution.

Elastic ceiling supports are installed at points predetermined by means of natural frequency measurements. The supports normally consist of double T-sections fitted with a high-precision wedge mount to at least one end of the section. The wedge mounts, in turn, are lined with AirLoc isolation pads. This means that the previously determined load capacity can be adjusted at any time via the height-adjustable wedge mounts.

Reduce ceiling vibrations

Search

Contact

AirLoc Ltd.
Industriestrasse 2
P.O. Box 123
CH-8618 Oetwil am See (Switzerland)

+41 44 929 77 00
+41 44 929 77 10

info(at)airloc-schrepfer.com
www.airloc-schrepfer.com

Foundation isolation of machine foundations

Schwingfundamente AirLoc

Machine foundations are vibration isolated by AirLoc to avoid transmission of vibrations to the environment. Download foundation isolation brochure

Vibration Engineering - bases

What is Vibration Engineering? Learn more about the bases of Vibration Engineering

© 2016 AirLoc Schrepfer Ltd.Telephone: +41 44 929 77 00 - Fax: +41 44 929 77 10
Industriestrasse 2, P.O. Box 123, CH-8618 Oetwil am See
www.airloc-schrepfer.com
info@airloc-schrepfer.com
Technical changes without prior notice
Print date: 05.12.2016